PRODUCT CHARACTERISTIC:
1. Temperature Monitoring
Monitor the working temperature of the charger at all times, Once the safe temperature is exceeded,the charger will stop working immediately,and the charging system can be auto-resumed when the temperature returns to normal.
2. Automatically Repair Faults
Smart chip can automatically repair common charging mistakes to ensure stable operation of the production.
3. Complete Certification
The product has passed all relevant certifications,ensuring that the product can be sold and used with confidence.
ELECTRICAL SPECIFICATION:
Input Voltage/Output voltage 175V-265V (Single Phase)
Input frequency 50/60Hz
Max. output power 7.0kW(single phase)
Max. output current 32A/16A
WORKING ENVIRONMENT:
Protection degree IP65
Environment temperature -25℃ ~ +55℃
Relative humidity 0-95% non-condensing
Maximum altitude <2000m
Cooling Natural air cooling
CHARGING BOX:
1. LCD screen
2. Easy installation
3. High compatibility
4. Waterproof grade:IP65
5. Small size, Easy to transport
6. Multiple security protection
7. Certified by authorities(CE,CQC)
8. Real-time monitor on temperature
EV CONNECTOR:
1. Built in temperature monitoring
2. Good conductivity
3. PVC CABLE
4. Durable and anticorrosion
5. Easy to bend,Long service life
6. High resistance to cold/high temperature
CORE ADVANTAGE:
1. Directional current regulation
2. Repair the disorder of capacitor units
3. Full-link temperature monitoring system
4. Strong Expansibility(Bluetooth,WiFi, 4G, Ethernet functions can be added)
PRODUCT ADVANTAGES:
7 Protections
Auto Repair
Efficient Charging
Protection Level IP65
1 Years Warranty
7 CORE PROTECTIONS:
Over Voltage Protection
Under Voltage Protection
Over Load Protection
Short Circuit Protection
Earth Leakage Protection
Over-temp Protection
Lightning Protection
PRODUCT DETAILS:
Product Size: 239*152*96mm
Total Length: 4.8m
Weight: 3.3KG
Box Size: 350*300*173mm
Gross Weight: 4KG
PACKING LIST:
7KW EV charging pile with cable *1
Screws *4
Mini Cable Holder Dock *1
STEPS FOR WIRING:
Plan A:
If a power distribution box is used, the L, N, and PE ends of the input cable of the plug correspond to the L, N, and PE ends of the circuit breaker respectively
Plan B:
If the connection connector (the figure is just a diagram, customers can choose the appropriate plug according to their needs), then the heat shrinkable waterproof connector is needed to connect the two ends, pay attention to L, N, PE corresponding connection, and use the crimping tool to squeeze the connection to ensure good contact.
STEPS FOR USAGE:
1.Make sure the charging box is connected power.
2.Connect the EV and the charging box with the EV charging cable.
3.Use swipe card or APP to start.
4.The vehicle is charged normally.
5.Click the APP or swipe the card to end.
6.Unplug the device and wrap the cable around the hook.
NOTE:
1.After the vehicle is fully charged, the device will automatically Stop charging.
2.Please read the instructions carefully before use.
3.Emergency stop button:You can press the button to stop and press it again to recover.
SPECIAL ATTENTION:
1. Do not try to disassemble the device by yourself under any circumstances, this may cause damage to the internal precision parts, and you will not be able to enjoy after-sales service.
2. Do not connect the circuit by yourself without the guidance of a professional.
3. Do not use when the inside of the charging plug is wet.
4. Do not install by yourself before reading the installation instructions.
5. Do not use for other purposes except for electric car charging.
APPLICATION SCENARIOS:
1. suitable for large, medium and small charging stations.
2. Urban residential areas, shopping squares.
3. Private charging pile applications.
4. Electric business places and other public places with parking spaces for electric vehicles.